Tullyoscar : Wedge Tomb

CountyLeitrim
Grid RefH 110 119
Longitude7° 49' 55.25" W
Latitude54° 3' 21.9" N
ITM east480366
ITM north584435
Nearest TownBallinamore (2.1 Km)
OS Sheets26, 27A
UTM zone29U
UTM x449041
UTM y5761192
Hide map  (N.B. Google Maps & GPS readings are slightly out of sync - position is approximate)
Show inline map (by Google Maps)

Visit Notes

Sunday, 13th October 2002

Classifying this as a wedge tomb is a guess because the remains are so scant that it really is hard to tell. Sitting in the midst of a golf course access is risky to say the least, but the course owner is happy to let you do so at your own peril.

All that really remains are the outline of the cairn, which is still slightly raised, and four very fine orthostats which could be the side of a wedge tomb or part of a court.

A barrow is essentially a mound of earth over one or more burials. They are more usually to be dated to the Bronze Age. There are many forms of barrow including ring, bowl, long and bell barrows.

Ring barrows are formed by digging a circular trench or fosse around a central burial, with no mound.

Bowl barrows are formed by heaping up soil over the burial(s) from a surrounding fosse, these often have an external bank too (see Ballyremon Commons (County Wicklow)).

Bell barows are simply round mounds with no fosse or external bank.

Long barrows are rare in Ireland and are more common in southwest England. Their shape is basically ovoid rather than round (see Ballynoe (County Down))

Click Thumbnail to View Full Size Image

___

Like this monument

Marked Sites

Random Gazetteer

A Selection of Other Wedge Tombs

About Coordinates Displayed

This is an explanation of (and a bit of a disclaimer for) the coordinates I provide.

Where a GPS figure is given this is the master for all other coordinates. According to my Garmin these are quite accurate.

Where there is no GPS figure the 6 figure grid reference is master for the others. This may not be very accurate as it could have come from the OS maps and could have been read by eye. Consequently, all other cordinates are going to have inaccuracies.

The calculation of Longitude and Latitude uses an algorithm that is not 100% accurate. The long/lat figures are used as a basis for calculating the UTM & ITM coordinates. Consequently, UTM & ITM coordinates are slightly out.

UTM is a global coordinate system - Universal Transverse Mercator - that is at the core of the GPS system.

ITM is the new coordinate system - Irish Transverse Mercator - that is more accurate and more GPS friendly than the Irish Grid Reference system. This will be used on the next generation of Irish OS maps.

Valid CSS Valid HTML
Page loaded from cache: (Generation time: September 18 2019 11:43:32.)
Top of page | Feedback | About this site
© Copyright Tom FourWinds 2001-2019