Hurlstone : Standing Stone

Grid RefN 943 875
GPSN 94273 87513 (7m)
Longitude6° 34' 5.06" W
Latitude53° 49' 42.72" N
ITM east480366
ITM north584435
Nearest TownArdee (3.6 Km)
OS Sheet36
UTM zone29U
UTM x449041
UTM y5761192
Hide map  (N.B. Google Maps & GPS readings are slightly out of sync - position is approximate)
Show inline map (by Google Maps)

Visit Notes

Sunday, 27th January 2002

The area probably takes its name from this holed stone. Like the Cloch-An-Phoill it is most likely a door stone from a tomb.

The hole is 15-20cm in diameter and beautifully formed. The whole stone is about 1.4m square and 25cm thick. One side is very smooth and the obverse is very rough.

Click Thumbnail to View Full Size Image


Sunday, 5th February 2006

This is another one of those sites I've wanted to return to for a long time now. It's a wonderful stone and its hole gives it very special status amongst Irish monuments. I love the fact that, by pure coincidence, the hole lines up with a big old tree on the horizon.

Click Thumbnail to View Full Size Image


Like this monument

Marked Sites


From Ardee take the N2 south and turn west along the R165. Take the second left and continue for about 650m. The stone is just in the field on your left.

Random Gazetteer

A Selection of Other Standing Stones

About Coordinates Displayed

This is an explanation of (and a bit of a disclaimer for) the coordinates I provide.

Where a GPS figure is given this is the master for all other coordinates. According to my Garmin these are quite accurate.

Where there is no GPS figure the 6 figure grid reference is master for the others. This may not be very accurate as it could have come from the OS maps and could have been read by eye. Consequently, all other cordinates are going to have inaccuracies.

The calculation of Longitude and Latitude uses an algorithm that is not 100% accurate. The long/lat figures are used as a basis for calculating the UTM & ITM coordinates. Consequently, UTM & ITM coordinates are slightly out.

UTM is a global coordinate system - Universal Transverse Mercator - that is at the core of the GPS system.

ITM is the new coordinate system - Irish Transverse Mercator - that is more accurate and more GPS friendly than the Irish Grid Reference system. This will be used on the next generation of Irish OS maps.

Valid CSS Valid HTML
Page loaded from cache: (Generation time: April 09 2020 09:38:37.)
Top of page | Feedback | About this site
© Copyright Tom FourWinds 2001-2020